NON PVC WATER BASE INK

NON PVC WATER BASE INK

Ecosol E1 

Ecosol E1 is Non PVC, Phthalate and Formaldehyde high solid content, waterbase thermoplastic acrylic.

Ecosol E1 System is an excellent product for use for printing depth dark shade on light color fabrics where excellent finish, elastomeric and soft hand feel are required. Motive printed with Ecosol will have excellent elastomeric properties, good washing fastness properties, good crocking properties and high color brilliancy.

Ecosol E1 System consists of White, High Opaque Base, and Clear. Printers are recommended to match colors using Pigments concentrated colors for optimum colors and performance.

• Mesh
  32T~43T (80-100) mono-filament for Metallic, Glitter, and Shimmer. 49~52S(120-130) mono-multi filament for under base white. 77~120S (200-300) mono-multi filament for detail print or for out line and tone on fabric
• SQUEEGEES
  55/65 sore hardness: For excellent opacity on printing under base white, are recommended. 65 sore hardness : For wet on wet for multi color printing. 75/85 sore hardness :For detail and fine toning effect.
• CURING CONDITION
  For maximum fastness, prints are to be cure at 150ºC/302°F. Airflow recommended is 1500 cfm/ 46cmm for 2 minutes.
• TYPE OF FABRICS
  Cotton, Blends Cotton Polyester and some stretchable Cotton /Nylon.
• color matching
  Always use Ecosol E1 Opaque Base in color matching. Commonly 10 to 15% of Pigments are used to achieve desire color. High glossy color can be achieved by using Ecosol E1 Clear. Use small dosage of Ecosol E1 White when opacity and pastel color effect are required.